Menu

Parts replacement

Parts replacement

Which tool do you have?

FELCO 2

N°1 Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.


FELCO 2 - Changing the anvil-blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°2 Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o


FELCO 2 - Changing the blade

The videos do not necessarily show the chosen tool. But the handling is the same.

N°3 Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.


FELCO 2 - Changing the plastic coatings for handles

The videos do not necessarily show the chosen tool. But the handling is the same.

N°4 Changing the shock absorber

When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.


FELCO 2 - Changing the shock absorber

The videos do not necessarily show the chosen tool. But the handling is the same.

N°5 Changing the thumb catch

When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.


FELCO 2 - Changing the thumb catch

The videos do not necessarily show the chosen tool. But the handling is the same.