Menu

Shop Detail

FELCO 6

One-hand pruning shear | High performance | Ergonomic | Compact

Reliable: Comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced.

Efficient: Easy, durable cutting adjustment / wire cutting notch / sap groove.

Ergonomic: Hand and wrist protection are provided by the ideal shape of the handles and the cushion-shock absorber / non-slip coating.

20mm</br>0.79inch 20mm
0.79inch
210g</br>0.46lb 210g
0.46lb
195mm</br>7.7inch 195mm
7.7inch
Medium hand Medium hand
$55.99
Find a reseller

SELECT YOUR PART

  • $5.75
    2/92 Kit: complete thumb catch assembly with plate, shock absorber
  • $5.13
    2/92B Kit: complete two position thumb catch assembly
  • $7.95
    2/93 Shock absorber assembly
  • $11.61
    6/90 Kit: bolt and nut
  • $4.65
    6/91 Kit: 2 springs
  • $8.68
    6/94 Kit: bolt/nut
  • $0.61
    2/5B Blade rivet
  • $4.89
    2/9 Toothed nut
  • $3.79
    2/10 Bushing
  • $2.20
    2/12 Thumb catch
  • $0.49
    2/13 Thumb catch spring washer
  • $0.73
    2/14 Thumb catch screw
  • $2.20
    2/15 Base plate
  • $1.59
    2/16 Toothed segment
  • $0.98
    2/18 Bumper
  • $0.61
    2/19 Crimped ring
  • $0.98
    2/20 Shock absorber
  • $16.51
    6/1 Complete handle assembly without blade
  • $11.25
    6/2 Complete handle assembly without counter blade
  • $13.57
    6/3 Blade
  • $14.18
    6/3-1 Kit: blade, spring, adjustment key
  • $14.43
    6/4 Counter blade with screw
  • $2.45
    6/6 Counter blade screw
  • $2.45
    6/7 Screw for toothed segment
  • $5.62
    6/8 Bolt
  • $2.69
    6/11 Nickel plated spring
  • $5.38
    6/35 Blade handle grip
  • $5.38
    6/36 Counter blade handle grip
  • $0.61
    2/30 Adjustment key
2/92
Kit: complete thumb catch assembly with plate, shock absorber
1x 2/15 + 1x 2/18 + 1x 2/14 + 1x 2/12 + 1x 2/13 + 1x 2/20
$5.75

Cleaning

It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

Oiling

After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

Sharpening

It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

Dismantling

It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o

Changing the shock absorber

When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

Changing the thumb catch

When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

Our other products

https://www.felco.com/us_en/homeproducts/get/categoryinfo/
loading
See full Pruning shears category