Menu

Shop Detail

FELCO 211-50

Lopper – Length 50 cm (19.7 in.) – CURVED cutting head

Reliable: lightweight aluminium handles / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced

Efficient: easy, durable cutting adjustment / curved cutting head for easier pruning work

Ergonomic: shock absorbers protect wrists and arms / handles with non-slip coating

35mm</br>1.38inch 35mm
1.38inch
800g</br>1.76lb 800g
1.76lb
500mm</br>19.7inch 500mm
19.7inch
$79.23
Find a reseller

SELECT YOUR PART

  • $6.48
    220/93 Kit: shock absorber
  • $14.30
    211/94 Kit: nut, bolt
  • $1.59
    2/16 Toothed segment
  • $4.89
    20/9 Toothed nut
  • $1.10
    20/11 Screw for toothed segment
  • $29.95
    211/3 Blade
  • $28.49
    211/4 Counter blade
  • $2.08
    211/6 Screw
  • $1.22
    211/7 Nut
  • $10.51
    211/8 Bolt
  • $31.42
    211/32 2 Complete handle assemblies - 36 cm (14.2 in.)
  • $3.79
    220/10 Shock absorber
  • $0.61
    2/30 Adjustment key
220/93
Kit: shock absorber
2x 220/10
$6.48

Cleaning

It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

Oiling

After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

Sharpening

It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!

Dismantling

It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o

Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

Changing the shock absorbers

When the tool closes too abruptly during pruning the shock absorbers should be changed.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them.

Download our documentations

Our other products

https://www.felco.com/us_en/homeproducts/get/categoryinfo/
loading
See full Pruning shears category