Shop Detail

FELCO 200A-50

Two-hand pruning shear | Length 50 cm (19.7 in.) | STRAIGHT cutting head

Reliable: lightweight aluminium handles / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced

Efficient: easy, durable cutting adjustment / slimline cutting head / grooved anvil blade for better grip

Ergonomic: shock absorbers protect wrists and arms / handles with non-slip coating

35mm</br>1.38inch 35mm
725g</br>1.6lb 725g
500mm</br>19.7inch 500mm
Find a reseller


  • $5.87
    20/93 Kit: shock absorber
  • $21.88
    20/94 Kit: nut, bolt
  • $1.59
    2/16 Toothed segment
  • $0.73
    20/5 Pin
  • $1.10
    20/7 Nut
  • $22.25
    20/8 Bolt
  • $4.89
    20/9 Toothed nut
  • $3.79
    20/10 Shock absorber
  • $1.10
    20/11 Screw for toothed segment
  • $0.86
    70/59 Screw
  • $28.00
    200/3 Blade
  • $33.62
    200/4 Counter blade
  • $2.32
    200/6 Screw
  • $31.18
    200A/32 2 Complete handle assemblies - 32 cm (12.6 in.)
  • $5.99
    200/35 Grips
  • $34.48
    200/37 Junction
  • $0.61
    2/30 Adjustment key
Kit: shock absorber
2x 20/10


It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.


After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.


It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!


It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o

Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

Changing the shock absorbers

When the tool closes too abruptly during pruning the shock absorbers should be changed.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them.

Our other products
See full Pruning shears category