Our e-shop is deactivated due to maintenance. Purchases are not possible at this time. Please contact a local authorized FELCO dealer HERE for purchases. Thank you for your patience.

Shop Detail

FELCO 200A-50

Two-hand pruning shear | Length 50 cm (19.7 in.) | STRAIGHT cutting head

There is no blunting the versatility of the FELCO 200A-50 loppers. Interchangeable handles allow you to opt for different tube lengths as the job requires. A straight tapered cutting head will have you precision working in the tightest of spaces and also lets you shape into a point. The balance between cutting power, comfort and manoeuvrability is epitomised by the exceptional grip of the toothed counter blade on the wood while rubber shock absorbers bring relief to your muscles no matter how hard you prune. 

35mm</br>1.38inch 35mm
725g</br>1.6lb 725g
500mm</br>19.7inch 500mm


There’s a time for precision - when the straight tapered cutting head of the FELCO 200A-50 loppers places you exactly where you want to be between closely growing branches. There’s a time for power - when you routinely make effortlessly clean cuts on wood up to 35 mm / 1.18 inches in diameter. Whenever you use these loppers is a time for versatility - delivered by the unflinching hold of the toothed anvil blade, the lightweight yet rugged construction and the interchangeable handles; which can be switched to a shorter or longer length to match the pruning conditions. And there will also be plenty of time left for you to congratulate yourself on a superior choice of all-round pruning tool – due to the matchless efficiency you will experience over a lifetime of use. 


  • $6.07
    20/93 Kit: shock absorber
  • $22.43
    20/94 Kit: nut, bolt
  • $1.72
    2/16 Toothed segment
  • $0.66
    20/5 Pin
  • $1.06
    20/7 Nut
  • $22.82
    20/8 Bolt
  • $5.01
    20/9 Toothed nut
  • $3.83
    20/10 Shock absorber
  • $1.06
    20/11 Screw for toothed segment
  • $0.79
    70/59 Screw
  • $28.63
    200/3 Blade
  • $34.56
    200/4 Counter blade
  • $2.37
    200/6 Screw
  • $31.93
    200A/32 2 Complete handle assemblies - 32 cm (12.6 in.)
  • $6.07
    200/35 Grips
  • $35.36
    200/37 Junction
  • $0.53
    2/30 Adjustment key
Kit: shock absorber
2x 20/10

Technical specifications

  • Two-handed shear with 50cm / 19.6 inches handles
  • Bypass pruning action
  • Fine tapered straight cutting head with toothed counter blade
  • Blade and counter blade constructed of hardened steel
  • Screw-mounted counter blade for easy replacement
  • Handle junctions in forged aluminium with lifetime guarantee
  • Interchangeable lightweight aluminium tube handles available in three lengths: 40, 50 and 60 cm / 15.7, 19.6 and 23.6 inches
  • Toothed nut for easy adjustment of cutting head
  • Tool adjustment key included for cutting head and closing lock adjustment
  • Rubber shock absorbers for more comfort to protect hands and wrists
  • Counter blade with sap groove
  • Phthalate-free non-slip handle grips*
  • All parts replaceable**
  • Made in Switzerland using 100% renewable energy

* Phthalates are known to be potential endocrine disruptors. FELCO has been producing phthalate-free products since 2015

** See inside packaging card or on specific product page on

Product benefits

  • The fine tapered cutting head enables easy access and greater reach to make pruning branches safe and efficient
  • Precision pruning and cutting to a point makes the FELCO 200A-40 loppers ideal for the fine detail and ensures you get the job done first time
  • An extremely rugged and durable design makes these loppers the dependable choice regardless of what you ask of them
  • The ultra-sharp blade cuts easily through larger pieces of wood which ensures you can make the most of any pruning session
  • The toothed anvil blade keeps wood just where you want it to ensure your pruning is an efficient and comfortable experience
  • Handles with forged aluminium junctions ensure your FELCO tool is robust enough for the heaviest-duty pruning
  • Interchangeable low weight aluminium tube handles - available in three lengths of 40, 50, and 60 cm / 15.7, 19.6 and 23.6 inch – adjust your reach as required and add convenience, making this the only tool you will need to carry
  • Rely on FELCO proprietary heat treating and hardening know-how to provide you with a long lasting ultra-sharp cutting edge
  • Easily adjust the cutting head for a clean and precise cut that promotes quick healing of the pruning wound
  • Enjoy comfortable and safe pruning with the ergonomic, cushioned, non-slip, phthalate-free handle grips*
  • Keep cutting for longer as rubber shock absorbers increase your handling comfort and reduce fatigue
  • The sap groove prevents the blade from sticking and improves cutting efficiency
  • The quick and easy blade change is safe, secure and ensures you can always get on with the job
  • If you value sustainability as much as we do, you’ll want to keep your FELCO in premium condition and minimise waste in using a tool where key parts - from the blade and counter blade to the smallest screw - are replaceable  
  • Red handles underline our Swiss heritage while acting as a convenient beacon, so you can always find your FELCO tool in any environment
  • Made in Switzerland using 100% renewable energy   

*Phthalates are known to be potential endocrine disruptors, FELCO has been producing phthalate-free products since 2015

Product & Maintenance Tips


It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.


After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.


It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!


It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o

Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

Changing the shock absorbers

When the tool closes too abruptly during pruning the shock absorbers should be changed.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them.

Our other products
See full Pruning shears category