Shop Detail


One-hand pruning shear | High performance | Ergonomic | Left-hand version

Reliable: Comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced.

Efficient: Easy, durable cutting adjustment / wire cutting notch / sap groove.

Ergonomic: Hand and wrist protection, and optimisation of the force exerted are provided by the revolving handle , the angled head and the cushion-shock absorber / non-slip coating.

25mm</br>0.98inch 25mm
290g</br>0.64lb 290g
210mm</br>8.3inch 210mm
Large hand Large hand

Left hand
Find a reseller


  • $4.65
    2/91 Kit: 2 springs
  • $7.95
    2/93 Shock absorber assembly
  • $11.61
    7/90 Kit: bolt and nut
  • $8.68
    7/94 Kit: bolt/nut
  • $4.89
    2/9 Toothed nut
  • $2.69
    2/11 Nickel plated spring
  • $0.49
    2/13 Thumb catch spring washer
  • $0.73
    2/14 Thumb catch screw
  • $1.59
    2/16 Toothed segment
  • $0.98
    2/18 Bumper
  • $0.61
    2/19 Crimped ring
  • $0.98
    2/20 Shock absorber
  • $0.61
    7/5B Blade rivet
  • $2.45
    7/6 Counter blade screw
  • $2.45
    7/7 Screw for toothed segment
  • $5.62
    7/8 Bolt
  • $3.79
    7/10 Bushing
  • $7.58
    7/23 Rotating handle axel
  • $5.38
    7/36 Counter blade handle grip
  • $14.67
    9/3 Blade
  • $14.43
    9/4 Counter blade with screw
  • $2.20
    9/12 Thumb catch
  • $2.20
    9/15 Base plate
  • $19.32
    10/1 Complete handle assembly without blade
  • $11.25
    10/2 Complete handle assembly without counter blade
  • $24.94
    10/22B Rotating handle
  • $0.61
    2/30 Adjustment key
Kit: 2 springs
2x 2/11


It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.


After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.


It is advisable to sharpen your tool at least once a day, but if you feel that your tool is not cutting as well as usual, sharpen it right away!


It is advisable to dismantle your tool on a regular basis, but at the very latest when it appears to be jammed.

Changing the anvil-blade

When the blade and anvil-blade no longer cross and the anvil-blade is badly damaged, it is advisable to change it.

Changing the blade

When the blade and the anvil-blade no longer cross, or when the blade is badly damaged, it is advisable to change it. Regulate the working of the blade and anvil-blade by adjusting the tightening of the nut. The blade should rub against the anvil-blade o

Dismantling the revolving handle

It is advisable to dismantle the revolving handle on a regular basis, so that it does not become jammed.

Changing the shock absorber

When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

Changing the thumb catch

When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

Our other products
See full Pruning shears category