Menu

Shop Detail

FELCO 50

Special Application | Hoof clippers

Reliable: Comfortable, light, sturdy handles made of forged aluminium with a lifetime guarantee* / blade and screw-mounted anvil blade made of high-quality hardened steel / clean, precise cut / all parts can be replaced.

Efficient: Easy, durable cutting adjustment / Protection against the risk of hoof infections thanks to blades coated with XYLAN®.

Ergonomic: Hand and wrist protection, and optimisation of the force exerted are provided by the revolving handle , the angled head and the cushion-shock absorber / non-slip coating.

305g</br>0.305oz 305g
0.305oz
220mm</br>8.6inch 220mm
8.6inch
$83.38
Find a reseller

SELECT YOUR PART

  • $5.75
    2/92 Kit: complete thumb catch assembly with plate, shock absorber
  • $7.95
    2/93 Shock absorber assembly
  • $11.61
    7/90 Kit: bolt and nut
  • $8.68
    7/94 Kit: bolt/nut
  • $19.32
    50/1 Complete handle assembly without blade
  • $13.08
    50/3 Blade
  • $17.24
    50/4 Counter blade
  • $1.83
    50/11 Nickel plated spring
  • $4.89
    2/9 Toothed nut
  • $2.20
    2/12 Thumb catch
  • $0.49
    2/13 Thumb catch spring washer
  • $0.73
    2/14 Thumb catch screw
  • $2.20
    2/15 Base plate
  • $1.59
    2/16 Toothed segment
  • $0.98
    2/18 Bumper
  • $0.61
    2/19 Crimped ring
  • $0.98
    2/20 Shock absorber
  • $11.25
    7/2B Complete handle assembly without counter blade
  • $0.61
    7/5B Blade rivet
  • $2.45
    7/6 Counter blade screw
  • $2.45
    7/7 Screw for toothed segment
  • $5.62
    7/8 Bolt
  • $3.79
    7/10 Bushing
  • $24.94
    7/22B Rotating handle
  • $7.58
    7/23 Rotating handle axel
  • $5.38
    7/36 Counter blade handle grip
  • $0.61
    2/30 Adjustment key
2/92
Kit: complete thumb catch assembly with plate, shock absorber
1x 2/15 + 1x 2/18 + 1x 2/14 + 1x 2/12 + 1x 2/13 + 1x 2/20
$5.75

Cleaning

It is advisable to clean your tool after each use. If your tool is particularly dirty or subject to rusting after exposure to moisture, do not delay cleaning.

Oiling

After cleaning, it is advisable to oil the tool so as to protect it from corrosion. The oil will also unjam the tool.

Changing the shock absorber

When the tool closes too abruptly during pruning, and the cushion is in good condition, the shock absorber should be changed.

Changing the thumb catch

When the thumb catch is damaged and loosens when used, even when the screw is readjusted, change it.

Changing the plastic coatings for handles

If the coatings are badly damaged, you can replace them. Soak the coatings for 2 minutes in boiling water - recommended glue: Loctite 415.

Our other products

https://www.felco.com/us_en/homeproducts/get/categoryinfo/
loading
See full Pruning shears category